DSP INVERTER CARDS
Leveraging on our sophisticated manufacturing unit we are able to offer a comprehensive range of DSP sine wave inverter cards. Our tested and ready for production range support to OEM supplier and bulk manufacturers. These are customized as per our clients specifications.
Specifications: Models
- 600VA,800 VA, 12 V single card solution
- 1400 VA 24V singel card solution
OUT PUT PURE SINE WAVE
Voltage Limits (Inverter Mode)
- Mains A.C. Lower Voltage Limit: 110+ 5V
- Mains A.C. Lower Recovery Volt: 120+ 5V
- Mains A.C. Higher Voltage Limit: 275+ 5V
- Mains A.C. Higher Recovery Voltage: 265+ 5V
- Output Voltage in Inverter Mode: 210V+5%
Voltage Limits (UPS Mode)
- Mains A.C. Lower Voltage Limit: 180+ 5V
- Mains A.C. Lower Recovery Voltage: 190+ 5V
- Mains A.C. Higher Voltage Limit: 255+ 5V
- Mains A.C. Higher Recovery Voltage: 245+ 5V
Output Frequency
- Main Output Frequency: Same as Input
- Inverter Output Frequency: 50.0+0.3Hz
Battery Charging
- Battery Charging Voltage Range: 125V- 275V
- Bulk Charging Current: 11.0+2.0Amp for High, 8-10 Amp for Low
- Boost Charging Current: 6+2.0Amp
- Float Charging Current :< 1 A
- Trickle Charging: 3+0.3A (When Battery Is Fully Discharged)
- Battery Charger Boost Voltage: 14.4+0.2V (Per Battery)
- Battery Charger Bulk Voltage: 13.6+0.2V (Per Battery)
- Provision for HI / LOW charging
Battery Lower Voltage Limit: 10+0.3(for 12V System)
THD; <1 on no load and <5. % on full load
Protection Overload
- 100+3 %( With Auto Reset Function)
- >300 %( With Manual Reset Function)
Short Circuit, Low Battery and Reverse Battery (With Manual Reset Function)
Indications
- Low Battery
- Battery Charging
- Battery charging On
- Inverter On
- Overload
- low Cut (battery)
- Short Circuit
- Fuse blown
- Reverse battery
ChargerDSP controlled CC/CV Charger with Soft Start
Charging technology
Embedded with DSP based high frequency five stage dynamic charger & inbuilt battery saver that adjusts itself at battery condition and enhance battery life
TechnologyFull bridge 20kh PWM for silent operation and fast control.
|